Home Command line utilities Moro – A Command Line Productivity Tool For Tracking Work Hours

Moro – A Command Line Productivity Tool For Tracking Work Hours

By sk
724 views

Keeping track of your work hours will give you an insight about the amount of work you get done in a specific time frame. There are plenty of GUI-based productivity tools available on the Internet for tracking work hours. However, I couldn't find a good CLI-based tool. Today, I stumbled upon a a simple, yet useful tool named "Moro" for tracking work hours. Moro is a Finnish word which means "Hello". Using Moro, you can find how much time you take to complete a specific task. It is free, open source and written using NodeJS.

Moro - A Command Line Productivity Tool For Tracking Work Hours

Since Moro is written using NodeJS, make sure you have installed it on your system. If you haven't installed it already, follow the link given below to install NodeJS and NPM in your Linux box.

Once NodeJS and Npm installed, run the following command to install Moro.

$ npm install -g moro

Usage

Moro's working concept is very simple. It saves your work staring time, ending time and the break time in your system. At the end of each day, it will tell you how many hours you have worked!

When you reached to office, just type:

$ moro

Sample output:

? Moro \o/

✔ You clocked in at: 9:20

Moro will register this time as your starting time.

When you leave the office, again type:

$ moro

Sample output:

? Moro \o/

✔ You clocked out at: 19:22

ℹ Today looks like this so far:

┌──────────────────┬─────────────────────────┐
│ Today you worked │ 9 Hours and 72 Minutes │
├──────────────────┼─────────────────────────┤
│ Clock in           │ 9:20 │
├──────────────────┼─────────────────────────┤
│ Clock out          │ 19:22 │
├──────────────────┼─────────────────────────┤
│ Break duration     │ 30 minutes │
├──────────────────┼─────────────────────────┤
│ Date                │ 2018-03-19  │
└──────────────────┴─────────────────────────┘
ℹ Run moro --help to learn how to edit your clock in, clock out or break duration for today

Moro will registers that time as your ending time.

Now, More will subtract the starting time from ending time and then subtracts another 30 minutes for break time from the total and gives you the total working hours on that day. Sorry I am really terrible at explaining Math calculations. Let us say you came to work at 10 am in the morning and left 17.30 in the evening. So, the total hours you spent on the office is 7.30 hours (i.e 17.30-10). Then subtract the break time (default is 30 minutes) from the total. Hence, your total working time is 7 hours. Understood? Great!

Note: Don't confuse "moro" with "more" command like I did while writing this guide.

To see all your registered hours, run:

$ moro report --all

Just in case, you forgot to register the start time or end time, you can specify that later on the same.

For example, to register 10 am as start time, run:

$ moro hi 10:00

? Moro \o/

✔ You clocked in at: 10:00

⏰ Working until 18:00 will make it a full (7.5 hours) day

To register 17.30 as end time:

$ moro bye 17:30

? Moro \o/

✔ You clocked out at: 17:30

ℹ Today looks like this so far:

┌──────────────────┬───────────────────────┐
│ Today you worked │ 7 Hours and 0 Minutes │
├──────────────────┼───────────────────────┤
│ Clock in │ 10:00 │
├──────────────────┼───────────────────────┤
│ Clock out │ 17:30 │
├──────────────────┼───────────────────────┤
│ Break duration │ 30 minutes │
├──────────────────┼───────────────────────┤
│ Date │ 2018-03-19 │
└──────────────────┴───────────────────────┘
ℹ Run moro --help to learn how to edit your clock in, clock out or break duration for today

You already know Moro will subtract 30 minutes for break time, by default. If you wanted to set a custom break time, you could simply set it using command:

$ moro break 45

Now, the break time is 45 minutes.

To clear all data:

$ moro clear --yes

? Moro \o/

✔ Database file deleted successfully

Add notes

Sometimes, you may want to add note while working. Don't look for a separate note taking application. Moro will help you to add notes. To add a note, just run:

$ moro note mynotes

To search for the registered notes at later time, simply do:

$ moro search mynotes

Change default settings

The default full work day is 7.5 hours. Since the developer is from Finland, it's the official work hours. You can, however, change this settings as per your country's work hours.

Say for example, to set it 7 hours, run:

$ moro config --day 7

Also the default break time can be changed from 30 minutes like below:

$ moro config --break 45

Backup your data

Like I already said, Moro stores the tracking time data in your home directory, and the file name is .moro-data.db.

You can can, however, save the backup database file to different location. To do so, move the .more-data.db file to a different location of your choice and tell Moro to use that database file like below.

$ moro config --database-path /home/sk/personal/moro-data.db

As per above command, I have assigned the default database file's location to /home/sk/personal directory.

For help, run:

$ moro --help

As you can see, Moro is very simple, yet useful to track how much time you've spent to get your work done. It is will be useful for freelancers and also anyone who must get things done under a limited time frame.

And, that's all for today. Hope this helps. More good stuffs to come. Stay tuned!

Cheers!

Resource:

Thanks for stopping by!

Help us to help you:

Have a Good day!!

You May Also Like

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. By using this site, we will assume that you're OK with it. Accept Read More